Upper School students have access to printing on campus through their BYOD devices. Once you install the printer drivers on your device, printing is completed by printing to “Mobility Print” and then “releasing” the print job at several Sharp copiers on campus. 


MacOS users, please pay attention to the extra instructions in Step 2.


Step 1: Installing “Mobility Print” on your BYOD 

  1. You must be on the NCS network when you complete this step. Make sure you are connected to NCS-WiFi (password ncshive1) when you download follow this step.
  2. Open this link: http://ncsprinter:9163/setup and select “Download.” The installer for your device operating system will be downloaded. 
  3. Launch/open the installer. You may be asked to enter your device admin credentials to install a program. You will be prompted through steps to install the printer on your device. Select “BW_Mobility_Print” when given the option. 
    • You might be asked to enter your “network login” during the installation step. Enter your NCS username (email without @cathedral.org) and NCS password.

Step 2: Printing

  1. Open the file you wish to print and select the option to print.
  2. Select the BW_Mobility_Print option. You do not need to select a specific printer location.
  3. You may be asked to enter credentials the first time you print. This is your NCS credential. Please enter your username (email without @cathedral.org) and NCS password. MAC USERS, the popup window asking you to enter your credentials might be prefilled with your DEVICE username. Please delete this and enter your NCS username as described above.

Step 3: “Releasing” your print job

  1. You can “release” your print job at a number of Sharp copiers on campus. Copier locations are the following:

Hearst: 2nd floor in front of Auditorium, 3rd floor by H 300, 4th floor by H 428
Woodley North: In front of WN115, WN 215, and WN315 and in the Woodley Library.

  1. Tap “Username and password” on the copier screen. You can pull out the keyboard under the display or use the virtual keyboard.
  2. Enter your NCS username (email without @cathedral.org) and password.
  3. Tap “Print Release” or “Print All” to release your print.